11x4x3 tutorial part 3

Continue around the mold placing the cord OVER/UNDER on the left side and UNDER/OVER on the right side.

When you get back to the starting point you will notice that the first standing part and the running part are parallel and follow the same over/under sequence.

This indicates that the knot is complete!

You may follow the standing part around with the cord to "double" the weave and follow around again to "triple" the weave.

Carefully remove the excess slack as you go.

This shows the knot worked up to finished shape with three passes of the cord.

This pattern can be found in the Ashley Book of Knots #1342, page 239

Here's the finished product! See some design and color variations here.


< back to page two 

< start over page one 

design and photographs © copyright 2012 WhatKnotShop

11x4x3 tutorial part 2

When you get back to the starting point place the running cord UNDER the first standing part then OVER the second standing part as shown. Place the bight under the rubber band.

At the next intersection place the running part OVER the first standing part then UNDER the second standing part as shown. Place the bight under the rubber band, keep everything even and parallel.

Continue with the UNDER/OVER moves at the next intersection following the same sequence.

Continue with the OVER/UNDER pattern at the next intersection.

Adjust the position of the rubber bands to keep everything even.

< back to page one   forward to page three >

design and photographs © copyright 2012 WhatKnotShop

11x4x3 turks head knot tutorial part 1

This tutorial shows how to make an 11 bight by 4 part turks head knot out of 3 mm cord.
"Bight" is the place where the cord changes direction.
"Part" is the cord which is either "standing" (not moving) or "running" which is the live end.

Start with about 7 ft of cord. Make a three bight circumference of the mold placing the bights under the rubber bands as shown.

At the first overlap place the running end OVER the stationary or standing part as shown.

At the second overlap place the running part UNDER the standing part as shown.

Draw the cord though carefully and place the bight under the rubber band.

at the third overlap place the running part OVER the standing part as shown placing the bight under the rubber band.

The cords should be parallel and even.

                              go to page two >


design and photographs © copyright 2012 WhatKnotShop